久久精品亚洲一区二区三区浴池,午夜福利片1000无码免费,妺七AV导航福利,天天做天天爱天天爽综合网

山汽礦井車設備

  • 服務熱線:

    15065707252

當前位置:首頁 > 新聞中心 > 常見問題

新聞中心

服務熱線電話

15065707252

裝載機發生突然熄火,應該怎么處理?

來源:http://yygsbaby.com/ 發布時間:2021-12-13 瀏覽次數:0

內容詳情:
礦用裝載機主要用于空間狹窄的洞采作業的磷礦、銅礦、鐵礦、金礦、銀礦、鉛鋅礦、煤礦巷道等各種水電、礦山、隧道工程的碎石土料采集及輸送施工裝車。正確的操作礦用裝載機,可以延長其使用壽命,但是,在日常使用中,也很難避免裝載機不出故障,比較常見的是,裝載機發生突然熄火,應該怎么處理?
The mining loader is mainly used for the collection, transportation, construction and loading of crushed stone and soil materials in various hydropower, mining and tunnel projects such as phosphate, copper, iron ore, gold, silver, lead-zinc, coal mine roadway and so on. The correct operation of the mine loader can prolong its service life. However, in daily use, it is difficult to avoid the loader from failure. What is more common is that the loader suddenly stalls. What should be done?
1、礦用裝載機在作業、行駛中發動機突然熄火,駕駛員可以快速啟動發動機,如果啟動發動機失敗,可利用車輛存留的氣源踩剎車進行緊急制動,選擇合適的地帶進行停車檢查處理。
1. When the engine of the mine loader suddenly stalls during operation and driving, the driver can quickly start the engine. If the engine fails to start, the air source left by the vehicle can be used to step on the brake for emergency braking, and a suitable area can be selected for parking inspection and treatment.
2、如果發動機熄火后,制動氣源不夠的話,可利用手制動和鏟斗摩擦地面方式來實現停車。
2. If the brake air supply is insufficient after the engine is shut down, the parking can be realized by means of hand brake and bucket rubbing the ground.
3、如果在坡道上進行車輛檢查修理的時候,需要采取止輪措施。
3. If the vehicle is inspected and repaired on the ramp, wheel stop measures shall be taken.
4、再次重新打火試試能否正常啟動,有時可能是變速箱與發動機動力輸出軸還處于齒輪嚙合狀態下剎車,導致變速箱傳輸了巨大的反向阻力,而迫使發動機出現保護性熄火。
4. Start again and try to start normally. Sometimes, it may be that the transmission and the engine power take-off shaft are still in gear meshing, resulting in huge reverse resistance transmitted by the transmission and forcing the engine to stop protectively.
5、裝載機在全部檔位的情況下都是熄火,可以嘗試檢查下變速箱,如果其中油里含有大量鋁沫渣子等雜質,則說明該裝載機變矩器壞了。
5. The loader stalls in all gears. You can try to check the gearbox. If the oil contains a large amount of aluminum foam residue and other impurities, the torque converter of the loader is broken.
6、熄火后,直接檢查下高壓泵是否老化,是否需要更換。
6. After flameout, directly check whether the lower high-pressure pump is aging and needs to be replaced.
遇到礦用裝載機突然熄火的話,一定要采取正確的方法出處理,只有這樣才能很好地保證礦用裝載機的正常運行。
In case of sudden flameout of the mining loader, we must take the correct method to deal with it. Only in this way can we well ensure the normal operation of the mining loader.
本文的精彩內容由礦井裝載機提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://yygsbaby.com我們有專門的客服為您解答問題
The wonderful content of this article is provided by the mine loader. There are many wonderful content on this website. You can click to enter more content: http://yygsbaby.com We have special customer service to answer your questions