服務熱線電話If the water tank of our small loader has a problem, it will affect our application. Therefore, timely maintenance is the key to solve the problem. How should we repair it? Now let's take a look at the following suggestions.
第 一步大家需要做的是查驗，查驗小型裝載機配件的水箱的水位時，發動機需要先歇火，而且等候發動機和水箱冷卻了以后再進行檢查，我們應該查驗副水箱的水位，可是一般情況下，大家不要打開水箱蓋。
The first step is to check the water level of the water tank of the small loader accessories. When checking the water level of the water tank, the engine needs to shut down and wait for the engine and water tank to cool before checking. We should check the water level of the auxiliary water tank, but generally, you should not open the water tank cap.
接下來，要是沒有副水箱，那么我們就務必取出水箱蓋，而且要遵循以下操作指南。
Next, if there is no auxiliary water tank, we must take out the water tank cover and follow the following operation guidelines.
然后我們來看看水箱水位降低后的水位，也就是把手靠近發動機和水箱檢查周?chē)目諝鉁囟?，但是我們不能用手觸摸發動機和水箱。
Then let's take a look at the water level after the water level in the water tank drops, that is, the hand is close to the engine and water tank to check the ambient air temperature, but we can't touch the engine and water tank with our hands.
就要松脫水箱蓋給里邊的水緩解壓力，然后慢慢地取出水箱蓋就可以了。
Just loosen the water tank cover to relieve the pressure of the water inside, and then slowly take out the water tank cover.
就小型裝載機的油耗而言一定是單缸比雙缸低點，而且我們?cè)谶x購小型裝載機還要考慮到經濟性，整車的構造是比較耐用的，因此大家購買小型裝載機時凱興機械的小編提幾點建議。
As far as the fuel consumption of small loaders is concerned, it must be lower for single cylinder than for double cylinder. In addition, we should also consider the economy when purchasing small loaders. The structure of the whole vehicle is relatively durable. Therefore, when purchasing small loaders, we put forward some suggestions for Kaixing Machinery.
大家購買小型裝載機發動機，單缸發動機連接都是靠皮帶連的，并且在舊車后的啟動跟離合應用上也會給我們帶來一點不便，尤其是我們的小型裝載機的離合很容易產生難題，因此小編建議大家選晉工小型裝載機壓盤式離合這樣的話發動機就只能選雙缸及以上的了變速器一般都是腳踏式，含有高底速這個基本不用考慮全車剛架結構看著牢固也就可以了像以上講的在新車價位跟使用者的舒適感及往后的檢修成本而言，是比較經濟應用的像全壓的來說盡管方便使用但往后的檢修成本很高，并且在小型裝載機性能層面我個人覺得很不穩定，容易產生難題。
First of all, we buy small loader engines. Single cylinder engines are connected by belts, and it will also bring us a little inconvenience in the starting and clutch applications of old cars. In particular, the clutch of our small loader is easy to cause problems. Therefore, I suggest you choose the pressure plate clutch of small loader. In this way, we can only choose double cylinder and above engines. Generally, the transmission is pedal type, With high bottom speed, it is not necessary to consider that the rigid frame structure of the whole vehicle looks firm. As mentioned above, the new car price, the user's comfort and the future maintenance cost are relatively economical. As for full pressure, although it is convenient to use, the future maintenance cost is very high. In addition, I personally think that the performance of small loaders is very unstable and easy to cause problems.
以上就是為大家介紹的有關礦用裝載機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://yygsbaby.com
The above is a detailed introduction to the mining loader, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://yygsbaby.com
