正確的操作將有助于破碎工作的快速進行，當操作不足時，將使打擊的力量無法全然發揮；同時，裝載機打擊力量會反震破碎錘本體、護板及工程機本身的操作臂等，而導致上述部位的損壞。我們應該怎樣操作提高礦用裝載機的打擊力度？

The correct operation will help the crushing work to be carried out quickly. When the operation is insufficient, the striking power will not be fully exerted; At the same time, the impact force of the loader will vibrate back to the body of the crusher, the guard plate and the operating arm of the engineering machine itself, resulting in the damage of the above parts. How should we operate and improve the strike strength of mine loader?

1、注意裝載機操作方向

1. Pay attention to the operation direction of loader

當運行破碎工作時，請確認釬桿著點的方向與擊破碎物的表面為垂直方向，并盡可能隨時保持；如果與擊破物表面為傾斜狀度,則釬桿有可能自表面滑開,在此情況下,將會導致釬桿損壞并影響活塞。在破碎時，請先選擇適當?shù)拇驌酎c。并確認釬桿確實穩固后，再進行打擊。

When running crushing work, please make sure that the direction of the drill rod landing point is perpendicular to the surface of the broken object, and keep it as long as possible; If it is inclined to the surface of the object, the drill rod may slide away from the surface. In this case, the drill rod will be damaged and the piston will be affected. When crushing, please select the appropriate strike point first. After confirming that the drill rod is really stable, strike again.

2、破碎前的準備

2. Preparation before crushing

當裝載機高壓或低壓軟管有過度松動的現象時，請立即停止作業并即時檢查及修理。同時為小心起見，宜同時檢查其它地方是否有漏油情形發生，操作員應嚴格要求隨時注意打擊點的狀況。

When the high-pressure or low-pressure hose of the loader is excessively loose, please stop the operation immediately and check and repair immediately. At the same time, for the sake of caution, it is advisable to check whether there is oil leakage in other places at the same time, and the operator should strictly require to pay attention to the condition of the strike point at any time.

3、避免讓裝載機在無目標物狀況下空擊。

3. Avoid empty strike of loader without target.

當巖石或目標物已擊碎時，請立即停止破碎錘的打擊動作，持續漫無目標的沖擊只會造成前體及主體螺絲松動及受損，更甚者損及工程機械體。而發生漫無目的的打擊狀況，除因插入不當外，將破碎錘搖晃使用亦會造成影響。

When the rock or target has been broken, please stop the action of the hammer immediately. The continuous impact without target will only cause loosening and damage of the screw of the front body and the main body, and even more damage to the construction machinery. In the case of aimless strike, besides improper insertion, the use of the hammer will also be affected.

4、勿以裝載機推動重物或大石塊

4. Do not use the loader to push heavy objects or large stones

工作時勿以護板做為推動重物的工具，因此只會造成護板螺絲、釬桿破裂及損傷破碎錘，甚會使吊臂斷裂的主因。

When working, do not use the guard plate as a tool to push heavy objects. Therefore, it will only cause the guard plate screw and drill rod to break, damage the hammer, and even cause the boom to break.

除了以上4點之外，還不可以釬桿搖晃使用，因為破碎作業進行時，如企圖將釬桿以搖晃使用，主體螺絲與釬桿均將有破裂的可能。希望以上內容可以幫到大家。

In addition to the above four points, it is not allowed to use the drill rod by shaking, because during the crushing operation, if the drill rod is used by shaking, the main screw and the drill rod may break. I hope the above can help you.