The precautions for the running in period of the mine loader and the maintenance of each stage are not enough. There are many factors that affect the service life of the loader. Loader accessories editor to explain, what else should the operator pay attention to?

1.掌握礦井裝載機的操作規范

1. Master the operation specifications of mine loader

對于裝載機操作手來說，應該掌握設備的操作技巧，按照技術規范正確操作裝載機，真正的做到“三懂”（懂構造、懂原理、懂性能），“四會”（會使用、會保養、會檢查、會排除一般故障）。不僅要會開設備，還要懂設備會檢查保養設備，這樣才能保證裝載機的使用壽命更長。

For Loader Operators, they should master the operating skills of the equipment, operate the loader correctly according to the safety technical specifications, and truly achieve "three understandings" (understand the structure, understand the principle, and understand the performance), "four abilities" (be able to use, maintain, check, and eliminate general faults). It is necessary not only to be able to operate the equipment, but also to know that the equipment will check and maintain the equipment, so as to ensure a longer service life of the loader.

2.減少環境對裝載機的影響

2. Reduce the impact of the environment on the loader

有很多的用戶會忽略環境氣候對裝載機壽命的影響。眾多周知，工程機械設備大部分都是露天作業，根據接的工程不同，工作的地點也會發生變動，設備很易受到場地的溫度、環境、氣候等因素影響。若是長期固定場地工作的機械，應該有停機房（棚），或者采用上遮蓋，盡可能降低日曬雨淋帶來的傷害。所以應該根據氣候環境，采取相應的機器保護措施。

Many users will ignore the impact of environmental climate on the life of loaders. It is well known that most of the construction machinery and equipment are operated in the open air. According to the different projects, the working location will also change, and the equipment is easily affected by the temperature, environment, climate and other factors of the site. If the machine works on a fixed site for a long time, it should have a parking room (shed) or be covered to minimize the damage caused by the sun and rain. Therefore, corresponding machine protection measures should be taken according to the climatic environment.

3.不要因工期緊就忽視保養

3. Don't neglect maintenance due to tight construction period

施工單位不要因為工期吃緊，就忽視保養的重要性，對工程機械的保養不管不顧，錯誤認為設備只要運行正常無大的故障，就可以高枕無憂了；不及時保養將會產生很大的隱患，有很多大事故的出現，都是這樣日積月累積攢的，真正出現事故的時候就為時已晚，因此，不能為趕工程忘記裝載機的保養。

The construction unit should not ignore the importance of maintenance because of the tight construction period, ignore the maintenance of construction machinery, and mistakenly believe that as long as the equipment operates normally without major faults, it can rest easy; There will be great hidden dangers if it is not maintained in time. There are many major accidents, which are accumulated over time. It is too late to have an accident. Therefore, we cannot forget the maintenance of the loader in order to catch up with the project.

4.采用合適維修方法

4. Adopt appropriate maintenance methods

不能等到不得不維修的時候，才去修理裝載機，當發現故障應該及時去排除故障進行維修。維修實踐可采用下列方法：一是零件換位，施工機械上的許多零件，如推土機，挖掘機的履帶銷，柴油機缸套等，在運行中往往承受單向負荷，從而造成不均衡的磨損，如果適時地更換受到不均衡負荷零件的位置，使它們的磨損均衡，則可延長其使用壽命。二是采用的刷鍍與膠粘修復技術，也可以快速低成本地修復失效零件，如耐磨堆焊，噴涂金剛石電鍍層，磁性電鍍，激光電鍍等

You can't wait until you have to repair the loader. When you find a fault, you should remove it in time for maintenance. The following methods can be adopted in maintenance practice: first, part transposition. Many parts of construction machinery, such as bulldozers, crawler pins of excavators, cylinder liners of diesel engines, often bear one-way loads during operation, resulting in uneven wear. If the positions of parts subject to uneven loads are replaced in time to make their wear balanced, their service life can be extended. Second, advanced brush plating and adhesive repair technology can also be used to repair invalid parts quickly and at low cost, such as wear-resistant surfacing, diamond electroplating, magnetic electroplating, laser electroplating, etc

以上就是為大家介紹的有礦井裝載機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://yygsbaby.com

The above is a detailed introduction to the mine loader. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://yygsbaby.com