久久精品亚洲一区二区三区浴池,午夜福利片1000无码免费,妺七AV导航福利,天天做天天爱天天爽综合网

山汽礦井車設備

  • 服務熱線:

    15065707252

當前位置:首頁 > 新聞中心 > 行業新聞

新聞中心

服務熱線電話

15065707252

隧道裝載機工作前的技術檢查內容

來源:http://yygsbaby.com/ 發布時間:2022-03-01 瀏覽次數:0

內容詳情:
隧道裝載機是礦山企業必不可少的采礦設備,是人工和其它機械的替代產品。礦山施工的前提是性,這對于隧道裝載機的使用來說也是同樣的要求。為此,我們在機械開機使用前應先做以下相關技術檢查:
Tunnel loader is an essential mining equipment for mining enterprises and an alternative product of labor and other machinery. The premise of mine construction is safety, which is the same requirement for the use of tunnel loader. Therefore, we should check the following relevant technologies before starting the machine:
1、應該檢查電源系統:電纜、接頭應該確保完好,無破損的現象;連接線路應完好,無燒損、松脫現象。
1. First, check the power supply system: cables and connectors should be intact without damage; The connecting line shall be intact without burning and loosening.
2、檢查裝載機的液壓系統:液壓系統的元件及其聯接管路之間連接應緊固,無明顯滲漏現象;液壓油位應符合規定(油量約占油箱總?cè)莘e的4/5之間)。
2. Check the hydraulic system of the loader: the components of the hydraulic system and their connecting pipelines shall be firmly connected without obvious leakage; The hydraulic oil level shall meet the requirements (the oil volume accounts for about to 4 / 5 of the total volume of the oil tank).
3、檢查礦用裝載機的操縱系統:各操縱手柄應處于中立位置,操縱應靈活,無卡滯現象。
3. Check the operating system of the mine loader: each operating handle shall be in the neutral position, and the operation shall be flexible without jamming.
4、檢查加力泵內剎車油的油位;
4. Check the brake oil level in the booster pump;
5、松開柴油箱底部放油螺栓排除油箱內部殘余的水分;
5. Loosen the oil drain bolt at the bottom of the diesel tank to drain the residual water inside the tank;
6、檢查液壓油箱的油位;檢查發動機機油油量、水箱水量、變速器和柴油箱以及工作油箱油量;
6. Check the oil level of the hydraulic oil tank; Check the oil quantity of engine oil, water quantity of water tank, oil quantity of transmission, diesel tank and working oil tank;
7、檢查驅動橋制動摩擦片的使用情況及制動鉗有無漏油現象;
7. Check the service condition of the drive axle brake friction plate and the brake caliper for oil leakage;
8、檢查隧道裝載機剎車系統是否靈活,將腳踏閥放在中位,即剎車。如果長時間停止需要將機頭產板壓住地面。
8. Check whether the braking system of the tunnel loader is flexible, and put the foot valve in the middle, that is, braking. If it stops for a long time, it is necessary to press the production plate of the machine head against the ground.
以上就是今天帶給大家的知識,隧道裝載機專注行業多年,為用戶不斷的提供有價值的內容,更多內容請繼續關注我們:http://yygsbaby.com
The above is the knowledge brought to you today. Tunnel loaders have focused on the industry for many years and continuously provide users with valuable content. Please continue to pay attention to us for more content: http://yygsbaby.com