The underground loader is a production device equipment which is connected by manipulator and conveyor, and the functions of slag raking, conveying and loading are combined into one. It adopts electric full hydraulic control system. The engine is the equipment that provides power for the loader. Whether it can be started normally is directly related to whether the loader can work normally. Today, let's learn about the precautions after the engine of underground loader is started.

1、井下裝載機發動機啟動后，等制動氣壓達到安*氣壓的時候再準備起步，用于確保行車時的制動安*性。當出現緊急制動的時候，按下緊急及停車制動閥的按鈕，使緊急及停車制動放下，掛1擋起步。沒有緊急制動的話，只需放下停車制動手柄，正常起步即可。

1. After the engine of the underground loader is started, it is ready to start when the braking air pressure reaches the safety air pressure, which is used to ensure the braking safety during driving. In case of emergency braking, press the button of emergency and parking brake valve to put down the emergency and parking brake and start in gear 1. If there is no emergency braking, just put down the parking brake handle and start normally.

2、調整好后視鏡，使駕駛員入座后可以有好的視野效果；確保井下裝載機的喇叭、后退信號燈，以及所有的保險裝置可以正常工作；在即將起步或在檢查轉向左右靈活到位的時候，應該先按下喇叭，用于警告周圍人員注意**；井下裝載機在行走道路上的故障物需要清理干凈，特別要注意鐵塊、溝渠之類的障礙物，以免把輪胎割破。

2. Adjust the rear-view mirror so that the driver can have a good field of vision when seated; Ensure that the horn, backward signal light and all safety devices of the underground loader can work normally; When you are about to start or check that the steering is flexible and in place, you should first press the horn to warn the surrounding personnel to pay attention * *; The faulty objects of the underground loader on the walking road need to be cleaned up, and special attention should be paid to obstacles such as iron blocks and ditches to avoid cutting the tire.

3、在井下裝載機起步行走之前，應對所有的踏板、操縱手柄、方向盤先試一次，確定已處于正常狀態才開始作業。要特別注意檢查轉向、制動是否完好。確定轉向、制動完全正常之后，才可以起步運行；在裝載機行進時將鏟斗置于離地400mm左右的高度；井下裝載機在進行作業的時候應該盡量避免輪胎太多、打滑；盡量避免兩輪懸空，不允許只有兩輪著地而繼續作業。

3. Before starting the underground loader, all pedals, joysticks and steering wheels shall be tested first to ensure that they are in normal state before starting the operation. Pay special attention to check whether the steering and braking are intact. Only after confirming that the steering and braking are completely normal can it start and run; Place the bucket at a height of about 400mm above the ground when the loader is moving; When the underground loader is working, it should try to avoid too many tires and slipping; Try to avoid two wheels hanging in the air, and it is not allowed to continue the operation with only two wheels landing on the ground.

本文的精彩內容由礦井裝載機提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://yygsbaby.com我們有專門的客服為您解答問題

The wonderful contents of this article are provided by the mine loader. There are many wonderful contents on this website. You can click to enter more contents: http://yygsbaby.com We have special customer service to answer your questions