When the clutch control lever of the mine loader is pulled to make the clutch can be smoothly combined, the machinery can not start steadily and gradually to increase speed, but stop and move intermittently, and even make the roller shake. When the clutch is fully combined, the shake will disappear. What are the causes of the shaking of the mine loader?

礦井裝載機離合器發抖的原因：

Reasons for clutch shivering of mine loader:

離合器發抖的根本原因是主、從動盤間壓力分布不均，使離合器接合的時候，壓力增加不連續，導致離合器軸斷續轉動而引起機械間斷起步。

The basic reason for clutch shivering is that the pressure distribution between the driving plate and driven plate is uneven, which makes the pressure increase discontinuous when the clutch is engaged, resulting in intermittent rotation of the clutch shaft and mechanical intermittent starting.

1.主、從動盤間壓力分布不均勻：一種是非經常結合式離合器的壓爪壓緊力不均和不同步，引起的離合器發抖。另一種是經常接合式離合器的壓緊彈簧壓力不均或各分離杠桿調整不一致的時候引起離合器發抖。

1. Uneven pressure distribution between the driving and driven plates: one is the clutch shivering caused by uneven and asynchronous pressing force of the pressing claw of the infrequently combined clutch. The other is that the pressure of the compression spring of the frequently engaged clutch is uneven or the adjustment of each release lever is inconsistent, which causes the clutch to tremble.

2.從動盤翹曲、歪斜和變形引起的發抖。

2. Shake caused by warping, skew and deformation of driven plate.

3.離合器從動盤鉚接出現松動，從動盤鋼片斷裂、轉動件不平衡等引起的離合器發抖。

3. The clutch shakes due to looseness of clutch driven plate riveting, fracture of driven plate steel sheet, imbalance of rotating parts, etc.

由于礦井裝載機的離合器發抖不但會影響裝載機的舒適性，還會導致傳動系統零件被載荷沖擊，甚損壞機件。所以，為了減少這種危害，我們在使用的時候應該經常檢查離合器的狀況，必要的時候應該進行清洗、檢修或更換離合器的從動盤摩擦片等部件，維護它的正常運行。

Because the clutch of the mine loader shakes, it will not only affect the comfort of the loader, but also cause the transmission system parts to be impacted by the load, or even damage the machine parts. Therefore, in order to reduce this hazard, we should always check the condition of the clutch when using it, and if necessary, clean, repair or replace the driven plate friction plate and other components of the clutch to maintain its normal operation.