The mine loader needs careful maintenance in order to work longer and more effectively. Let's see how to maintain it together with Xiaobian:

常洗澡，散熱好為了確實保證整機的冷卻系統效能良好，應對冷卻系統的各個部件進行徹底的清理、緊固和潤滑，盡可能的清理冷卻系統水垢，以提高散熱效能，保持冷卻系統暢通和加速冷卻水的循環。

Take a bath frequently and dissipate heat well. In order to ensure the good efficiency of the cooling system of the whole machine, all components of the cooling system shall be thoroughly cleaned, fastened and lubricated, and the scale of the cooling system shall be cleaned as much as possible, so as to improve the heat dissipation efficiency, keep the cooling system unblocked and accelerate the circulation of cooling water.

及時更換水泵風扇傳送皮帶檢查水泵的風扇傳動皮帶，皮帶長期使用后，會產生疲勞、變形，降低冷卻效果。皮帶更換時，要注意型號和長度，并正確調整其松緊度。

Replace the water pump fan transmission belt in time and check the fan transmission belt of the water pump. After long-term use, the belt will produce fatigue and deformation and reduce the cooling effect. When replacing the belt, pay attention to the model and length, and correctly adjust its tightness.

經常檢查水箱，保持足量冷卻液檢查水箱連接膠管有無破裂和漏水現象，避免影響供水量，同時要保持足量的冷卻水，發現不足要及時添加。

Regularly check the water tank and maintain sufficient coolant. Check whether the connecting hose of the water tank is broken and leaking to avoid affecting the water supply. At the same time, maintain sufficient cooling water and add it in time if it is insufficient.

時刻關注水溫表為保證整機的正確使用，要時刻注意水溫表的讀數，達到90°以上時必須采取措施?？蛇x擇就近的陰涼處停車并以怠速降溫，注意不要即刻熄火，防止發動機內部過熱而造成拉缸等事故。

Always pay attention to the water temperature gauge. In order to ensure the correct use of the whole machine, always pay attention to the reading of the water temperature gauge. Measures must be taken when it reaches more than 90 °. You can choose the nearest shady place to stop and cool down at idle speed. Be careful not to shut down immediately to prevent cylinder pulling and other accidents caused by overheating inside the engine.

潤滑系統的性能檢測要有針對性的對潤滑系統的各個部件做一次性能檢測，以使機油壓力表、變速箱壓力表指示準確。對變速箱、變距器和驅動橋內的油液進行一次系統的檢查，并要保持油液清潔。

The performance test of the lubrication system shall be targeted to conduct one-time performance test on each component of the lubrication system, so as to make the indication of the oil pressure gauge and transmission pressure gauge accurate. Carry out a systematic inspection of the oil in the transmission, distance converter and drive axle, and keep the oil clean.

今天的礦用裝載機http://yygsbaby.com/知識就分享到這里了，感謝您的瀏覽，請點擊官網查看其他詳細內容。

Today's mine loaders http://yygsbaby.com/ That's all for knowledge sharing. Thank you for browsing. Please click the official website to view other details.