As we all know, new cars go through the running in period when they are in use. In order to ensure the stable operation of the loader in the future, mining loaders also need a running in period. What should be paid attention to in the running in period of the loader?

（1）由于裝載機的特殊性，操作職工應接受廠家的訓練、輔導，對機器的布局、機能有充足的認知及了解，并取得必定的操作及保護經驗然后才可以操作機器。

(1) Due to the particularity of the loader, the operator shall receive training and guidance from the manufacturer, have sufficient knowledge and understanding of the layout and function of the machine, and obtain certain operation and protection experience before operating the machine.

（2）留心磨合期的作業負荷，磨合期內的作業負荷通常不可以超過額外作業負荷的百分之六十，并要鋪排合適的作業量，避免機器長時間接連功課所致使的過熱現場的發作。

(2) Pay attention to the operation load during the running in period. The operation load during the running in period can not exceed 60% of the additional operation load, and arrange an appropriate amount of operation to avoid the occurrence of overheating on the site caused by the continuous operation of the machine for a long time.

（3）注意并經常性查看各外表指示，裝載機斗齒泛起反常要及時泊車予以掃除，在緣由未找到、毛病未掃除前應休止功課。留心常常查看光滑油、液壓油、冷卻液、制動液以及燃油油位和質量，并留心查看整機的密封性。查看中發現油水短少過多，應剖析緣由。

(3) Pay attention to and regularly check the appearance instructions. If the bucket teeth of the loader are abnormal, park the car in time to remove it. Stop your homework before the cause is not found and the problem is not removed. Pay attention to the oil level and quality of smooth oil, hydraulic oil, coolant, brake fluid and fuel, and pay attention to the tightness of the whole machine. It is found that there is too little oil and water during the inspection, and the reason should be analyzed.

（4）經常性的對礦用裝載機進行清洗，及時調整、緊固松動的零部件以防因松動而加重零部件的磨損或致使零部件丟掉。與此同時，應強化各光滑點的光滑，主張在磨合期內，每班都要對光滑點加注光滑脂，當然如果是遇到有特殊要求的是可以除外的。

(4) The mine loader shall be cleaned regularly, and the loose parts shall be adjusted and fastened in time to prevent the wear of parts or loss of parts due to looseness. At the same time, the smoothness of each smooth point should be strengthened. It is advocated that during the running in period, each shift should add smooth grease to the smooth points, except for those with special requirements.

總之，裝載機在磨合期內使用保養的要求可以歸納為：加強培訓、減輕負荷、注意檢查、強化潤滑。只要重視并按要求對裝載機實施磨合期的保養與維護，就會減少裝載機早期故障的發生，延長使用壽命，提高作業效率。

In short, the requirements for the use and maintenance of loaders during the running in period can be summarized as follows: strengthening training, reducing load, paying attention to inspection and strengthening lubrication. As long as we pay attention to and implement the maintenance and repair of the loader during the running in period as required, it will reduce the occurrence of early faults of the loader, prolong the service life and improve the operation efficiency.

以上就是井下裝載機http://yygsbaby.com為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is the underground loader http://yygsbaby.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!