As an indispensable member of the underground operation, the underground loader plays an irreplaceable role. The performance of the loader will directly affect the quality and efficiency of the due work. In the main operation system of the underground loader, the performance of the transmission in the hydraulic and hydraulic system will also affect the construction progress and quality of the project. Therefore, Understanding and mastering its use and maintenance knowledge and troubleshooting technology is the key work of modern engineering and technical personnel. For the maintenance method of torque converter of underground loader, we summarize the following points for you:

1.在每班工作結束后，及時檢查與井下裝載機變速箱有關機件的結合緊固情況，如果有松動，應該及時擰緊。

1. After the end of each shift, check the fastening of the parts related to the gearbox of the underground loader in time. If it is loose, tighten it in time.

2.當每工作100小時后，把變矩器蓋上的加油螺帽擰下來，用油位尺檢查油面的高度，油面高度應該在油位尺上下刻線之間。在進行測量的時候，拖拉機應該處于水平位置。油量不足的話，應該及時添加。

2. After every 100 hours of operation, unscrew the oil filler nut on the torque converter cover, and check the oil level with the oil level gauge. The oil level should be between the upper and lower scribes of the oil level gauge. When measuring, the tractor should be in a horizontal position. If the oil is insufficient, it should be added in time.

3.如果井下裝載機的潤滑油是齒輪油，要注意保持齒輪油的清潔，油中不應該有機械雜質，否則會加速齒輪的磨損情況。在進行加油時，應該注意加油工具和加油口位置的清潔。

3. If the lubricating oil of the underground loader is gear oil, pay attention to keep the gear oil clean, and there should be no mechanical impurities in the oil, otherwise the wear of the gear will be accelerated. When refueling, pay attention to the cleaning of refueling tools and refueling ports.

4.每工作500小時左右的時候，應該對變速箱進行清洗，及時更換齒輪油。清洗方法如下：井下裝載機工作結束后要趁熱放出贓油，然后加入適量的清潔柴油，拖拉機前進、倒退數次之后，放出柴油，再加入干凈的齒輪油。注意在不同的季節應該選用不同規格的齒輪油，冬季需要用冬季的齒輪油，夏季需要用夏季的齒輪油。

4. Every 500 hours or so, the gearbox should be cleaned and the gear oil should be replaced in time. The cleaning method is as follows: after the work of the underground loader is completed, drain the dirty oil while it is hot, and then add an appropriate amount of clean diesel oil. After the tractor moves forward and backward several times, drain the diesel oil, and then add clean gear oil. Note that gear oil of different specifications should be selected in different seasons. Gear oil in winter and gear oil in summer should be used in winter and summer.

除此之外，應該定期檢查各處油封和襯墊紙板的密封以及完好情況，必要的時候應該及時更換。在進行更換時，襯墊紙板的厚度應該與原來厚度相同以保證正確的軸向間隙，確保井下裝載機可以正常運行。

In addition, the seals and intactness of oil seals and liner cardboard should be checked regularly, and they should be replaced in time when necessary. When replacing, the thickness of the liner cardboard should be the same as the original thickness to ensure the correct axial clearance and ensure the normal operation of the underground loader.

以上就是為大家介紹的有關家用礦用裝載機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://yygsbaby.com

The above is a detailed introduction to household mining loaders. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://yygsbaby.com