As an indispensable member of the underground operation, the underground loader plays an irreplaceable role. The performance of the loader will directly affect the quality and efficiency of the expired work. In the main operating system of the underground loader, the performance of the transmission in the hydraulic and hydraulic systems will also affect the construction progress and quality of the project. Therefore, it is the work of modern engineering technicians to understand and master its use and maintenance knowledge and troubleshooting technology. For the maintenance method of torque converter of underground loader, we summarize the following points for you:

1.在每班工作結束后，及時檢查與井下裝載機變速箱有關機件的結合緊固情況，如果有松動，應該及時擰緊。

1. after the end of each shift, check the fastening of the parts related to the gearbox of the underground loader in time. If they are loose, tighten them in time.

2.當每工作100小時后，把變矩器蓋上的加油螺帽擰下來，用油位尺檢查油面的高度，油面高度應該在油位尺上下刻線之間。在進行測量的時候，拖拉機應該處于水平位置。油量不足的話，應該及時添加。

2. after every 100 hours of operation, unscrew the oil filler nut on the torque converter cover, and check the oil level with the oil level gauge. The oil level should be between the upper and lower scribes of the oil level gauge. The tractor should be in a horizontal position when measuring. If the oil quantity is insufficient, it should be added in time.

3.如果井下裝載機的潤滑油是齒輪油，要注意保持齒輪油的清潔，油中不應該有機械雜質，否則會加速齒輪的磨損情況。在進行加油時，應該注意加油工具和加油口位置的清潔。

3. if the lubricating oil of the underground loader is gear oil, pay attention to keep the gear oil clean. There should be no mechanical impurities in the oil, otherwise the wear of the gear will be accelerated. When refuelling, pay attention to the cleanliness of the refuelling tool and the position of the refuelling port.

4.每工作500小時左右的時候，應該對變速箱進行清洗，及時更換齒輪油。清洗方法如下：井下裝載機工作結束后要趁熱放出贓油，然后加入適量的清潔柴油，拖拉機前進、倒退數次之后，放出柴油，再加入干凈的齒輪油。注意在不同的季節(jié)應該選用不同規(guī)格的齒輪油，冬季需要用冬季的齒輪油，夏季需要用夏季的齒輪油。

4. the gearbox should be cleaned and the gear oil should be replaced in time every 500 hours or so. The cleaning method is as follows: after the work of the underground loader is completed, the dirty oil shall be discharged while it is hot, and then an appropriate amount of clean diesel oil shall be added. After the tractor moves forward and backward several times, the diesel oil shall be discharged, and then the clean gear oil shall be added. Note that gear oil of different specifications should be selected in different seasons. Gear oil of winter should be used in winter and gear oil of summer should be used in summer.

除此之外，應該定期檢查各處油封和襯墊紙板的密封以及完好情況，必要的時候應該及時更換。在進行更換時，襯墊紙板的厚度應該與原來厚度相同以保證正確的軸向間隙，確保井下裝載機可以正常運行。

In addition, the seals and intactness of oil seals and linerboard shall be checked regularly, and they shall be replaced in time if necessary. During replacement, the thickness of the liner board should be the same as the original thickness to ensure the correct axial clearance and ensure the normal operation of the underground loader.

以上就是為大家介紹的礦用裝載機http://yygsbaby.com有關的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯(lián)系我們.我們將以的態(tài)度,為您提供服務.

The above is the mine loader introduced to you http://yygsbaby.com I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service