Before starting today's article summary, let's ask our friends a question. Have you ever had a sudden shutdown when using the reprint machine? Then how did this phenomenon happen? Is there a solution? So let's make a detailed summary and share with our friends today. Interested friends can read on. Of course, if we have any questions in the process of summarizing and sharing, We can communicate and discuss at any time.

遇到停機的轉臺就要確定一下，發動機供油管中是不是進入了空氣中，造成了供油中斷。油路中的密封性不夠造成的，在這里呢小編給朋友們分享一個小技巧。

In case of shutdown of the turntable, it is necessary to first determine whether the oil supply pipe of the engine has entered the air, resulting in the interruption of oil supply. It's caused by insufficient sealing in the oil circuit. Here, I'd like to share a little skill with my friends.

可以用在停機后對燃油系統排空氣體的方法來判斷。假如根據用手油泵泵油，在排空氣體螺釘處釋放很多泡沫狀油氣泡，則為油中油氣所致停機。應認真仔細低壓油路的密閉性。噴油泵凸輪軸折斷或滾鍵，連接板斷裂，應檢修噴油泵。

It can be judged by emptying the fuel system after shutdown. If the oil is pumped by hand oil pump, a lot of foam oil bubbles will be released at the vent gas screw, which will cause the shutdown of the oil and gas in the oil. Carefully check the tightness of low-pressure oil circuit. If the camshaft of the fuel injection pump is broken or the rolling key and the connecting plate are broken, the fuel injection pump should be repaired.

裝載機的零件在疲勞破壞過程中，其裂紋的程度是逐漸擴展的，同時其程度又是可以探測的。當探測到裝載機某些部件的裂紋擴展的程度已接近允許的臨界值時，便認為是存在潛在故障，也需要按實際故障一樣來處理。

In the process of fatigue failure of loader parts, the degree of crack is gradually expanding, and its degree can be detected at the same time. When it is detected that the crack growth degree of some parts of the loader is close to the allowable critical value, it is considered that there is a potential fault, which also needs to be handled according to the actual fault.

及時的探明了裝載機的潛在故障，就有可能在裝載機達到功能故障之前進行排除，這有利于保持裝載機完好狀態，避免由于發生功能故障而可能帶來的不利后果，這在裝載機的使用維修實際中具有重要意義。

If the potential faults of the loader are found out in time, it is possible to eliminate them before the loader reaches the functional fault, which is conducive to keeping the loader in good condition and avoiding the possible adverse consequences due to the functional fault, which is of great significance in the use and maintenance of the loader.